| Number of Channels | 4 |
Rated Power
continuous power | 50W x 4 @ 4-Ohms RMS
100W x 4 @ 2-Ohms RMS
200W x 2 @ 4-Ohms bridged RMS |
Total Power
total sum of 'rated power' | 400 Watts |
Dynamic Power
powercube measurement | Front Channels
86 Watts x 2 @ 4-Ohms 0° Res
144 Watts x 2 @ 2-Ohms 0° Res
Rear Channels
85 Watts x 2 @ 4-Ohms 0° Res
142 Watts x 2 @ 2-Ohms 0° Res |
| Bridgeable | Yes |
| Efficiency (average) | 71% @ 4-Ohm
70% @ 2-Ohm |
| Crossover Controls | Front High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth
Front Low-Pass (LP): 50-500Hz 12dB/octave Butterworth
Rear High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 12dB/octave Butterworth |
| Tone Controls | Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Front Punch EQ2 Treble: 0dB to +12dB @ 12kHz
Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Rear Punch EQ2 Treble: 0dB to +12dB @ 12kHz
Function depends upon LP/AP/HP switch position |
| Signal Input | Low level: 2 RCA pair |
| Signal Output | n/a |
| Power Input Connector | Block |
| Power Wire Gauge | 4 AWG |
| Speaker Output Connector | Screw terminal barrier strip |
| Speaker Wire Gauge | 8 AWG to 18 AWG |
| Heat Sink Type | Cast aluminum |
| Cooling | Convection |
| Remote Controls | Optional PEQ Remote Punch EQ
(overrides built-in Punch EQ2 for rear channels only) |
| Visual Indicators | Power
Thermal
Protect |
| Circuit Topology Class | Class A/B |
| Frequency Response | 20Hz to 20kHz +/- 1.0dB |
| Shipping Weight | 8.89 Lbs.
(4.03 Kg.) |
| Dimensions (HxWxL) | 2.25 x 7.625 x 13.02 (in)
5.71 x 19.37 x 33.07 (cm) |
3 Opiniões
